2007 Product Update (CEU01)
This four day course covers the following 2007 product updates: DDC Series 60, MBE 900, MBE 4000, DDEC VI, the Aftertreatment System, & Diagnostics.
Pre-Requisites: In order to take this course you must be expert certified in one of the three EPA 04 Engines.
|
Pre-Req for CEU01 2007 Product Update--Series 60
- S60 Product Intro Fuel
- S60 Product Intro Cooling
- S60 Product Intro Air-Intake
- S60 Product Intro Lube
- S60 Product Intro Tune-Up
- S60 Maintenance
- S60 Major Repair ILT Class
- DDEC IV-V
- DDEC Reports
- Basic Diagnostics
- 2007 S60 Engine Update
- 2007 Aftertreatment
- 2007 Basic Diagnostics
- EPA 04 Engine Diagnostics ILT or Legacy DDEC IIIIV V ILT Class
|
Pre-Req for CEU01 2007 Product Update--MBE 900
- MBE 900 Product Intro Fuel
- MBE 900 Product Intro Cooling
- MBE 900 Product Intro Air-Intake
- MBE 900 Product Intro Lube
- MBE 900 Product Intro Tune-Up
- MBE 900 Maintenance
- MBE 900 Major Repair ILT Class
- MBE Electronics
- DDEC Reports
- Basic Diagnostics
- 2007 MBE 900 Engine Update
- 2007 Aftertreatment
- 2007 Basic Diagnostics
- EPA 04 Engine Diagnostics ILT or Legacy MBE Electronics ILT Class
|
|
Pre-Req for CEU01 2007 Product Update--MBE 4000
- MBE 4000 Product Intro Fuel
- MBE 4000 Product Intro Cooling
- MBE 4000 Product Intro Air-Intake
- MBE 4000 Product Intro Lube
- MBE 4000 Product Intro Tune-Up
- MBE 4000 Maintenance
- MBE 4000 Major Repair ILT Class
- MBE Electronics
- DDEC Reports
- Basic Diagnostics
- 2007 MBE 900 Engine Update
- 2007 Aftertreatment
- 2007 Basic Diagnostics
- EPA 04 Engine Diagnostics ILT or Legacy MBE Electronics ILT
|
The material that will be covered in this course includes the following:
|
Series 60 Update
- Understand the reasons for changes in the fuel and the effects of not using the proper fuel in the aftertreatment system (MBE 900, MBE 4000)
- Understand the flow of the fuel system
- Understand the fuel passage changes within the cylinder head.
- Identify the functions of the E3 injector
- Understand the functionality of the second solenoid
- Identify changes in the coolant flow
- Understand the functionality of the crankcase breather
- Identify the new 797B Jake brake, dual solenoids, electrical leads, and injector harness assembly with tray
|
DDEC VI
- Identify DDEC VI changes
- Understand the function of the Amber Warning Lamp (AWL)
- Understand the function of the Red Stop Lamp (RSL)
- Understand the function of the Diesel Particulate Filter (DPF) regeneration lamp
- Understand the function of the High Exhaust System Temperature (HEST) lamp
- Understand the function of the Malfunction Indicator Lamp (MIL)
|
|
MBE 900 Update
- Identify fuel flow changes
- Understand the stages of fuel injection on the MBE engines
- Understand the functionality of the single and dual stage turbo charger
- Identify component changes in the cooling system
- Understand the function of the Electronic Oil Seperator (EOS)
MBE 4000 Update
- Identify fuel flow changes
- Understand the stages of fuel injection on the MBE engines
- Understand the functionality of the brake gate
- Identify component changes in the cooling system
Diagnostics
- Understand the correct procedures to diagnose and troubleshoot potential problems
- Understand the proper tools to use when diagnosing a concern
- Be able to perform diagnostic procedures in a logical step by step manner
|
Aftertreatment System
- Understand the operation and function of the aftertreatment system
- Understand the function of the DPF regeneration lamp
- Identify the material within the aftertreatment substrate
- Identify aftertreatment failure modes
- Understand the functionality of the doser block assembly, identifying the sensors and valves
- Understand the functionality and diagnostic procedures of the intake throttle valve and exhaust flap
- Properly diagnose and troubleshoot concerns relating to the aftertreatment system
- Understand and perform the adjustment of the Series 60 turbo actuator
|